FMM50 Electromechanical Level Measurement Silopilot

Endress + Hauser Electromechanical Level measurement Silopilot FMM50

For continuous level measurement even in high bulk solids silos or bins

Silopilot FMM50 is an electromechanical level system. Depending on the sensing weight, the level can be measured in bins or silos with dusty, fine-grained or coarse-grained bulk solids or in tanks with liquids.

Benefits

High reliability level measurement of powdery, fine-grained or coarse-grained bulk solids

Safe measurements in extremely dusty environments

Fully electronic digital minimum fail-safe control, therefore no running down of the sensor weight into the silo outlet and no risk to the conveying systems

Quick menu-guided local operation using a 4-line text display

High performance three-phase engine (traction power up to 500N) using a single-phase supply voltage by employment of a converter, therefore simple electric supply

Optional design with certification for application in areas subject to dust explosion hazard zones 20, 21 and 22 (measuring zone) or zones 21 and 22 (device zone), category 1/2D

Field of application

For level measurement in bunkers or silos for dusty, fine or coarse-grained bulk products, or in tanks containing liquids.

Process connection: Flange

Temperature: -40 to +230°C (-40 to +446°F)

Pressure: 0.8 to 3bar (11.6 to 43.5psi)

Measuring range: 70m (230ft)

Accuracy: ±5cm (1.97")

International explosion protection certificates