High Pressure Regulator 3 Way Diverter Valve Flow Control
Product Description
Pneumatic slide valve is the main flow control transmission equipment for powder, grain and small particles. The worn parts of this gate valve are used of wear-resistant materials, it can operate in a poor environment for a long-term without troubles. Not only automatic water valve flow control, HENT also manufactures gate valves equipped with the electric or manual drive device to control valve’s operation.
High sealing, no leaking
Easy installation, no constrain angle
16Mo3 steel for plate, import from German, no deformation ≤600°C
45# steel for screw, brass for screw assembly, avoid adhesion
Square steel in one side of the gate path, rollers in another side, low f
riction & avoid dust stratification
Difunctional cylinder device, Schneider limit switch , smooth, low vibration & noise
SIZE | AXA | B | N×C | D | E | H |
400 | 400×400 | 400 | 4×117 | 516 | 586 | 1798 |
500 | 500×500 | 500 | 4×142 | 616 | 686 | 2108 |
600 | 600×600 | 600 | 4×167 | 716 | 786 | 2508 |
700 | 700×700 | 700 | 6×130 | 850 | 892 | 2908 |
800 | 800×800 | 800 | 8×110 | 950 | 992 | 3308 |
900 | 900×900 | 900 | 8×123 | 1050 | 1092 | 3708 |
1000 | 1000×1000 | 1000 | 9×120 | 1150 | 1192 | 4108 |
Technical Parameters
Size(mm) | 400~1000 |
Capacity(m3/h) | 110~750 |
Pneumatic Pressure (Mpa) | 0.4~0.7 |
Temperature(°C) | ≤550 |